Blog

Typically, when lubrication programs are developed and implemented, everyone automatically believes that all lubrication issues have been solved and will never occur again. This is furthest from the truth! In this 3-part series, we will explore some of the hidden failures in lubrication programs. We will start off with dispelling the illusion of a good program then dive deeper into the failure modes which are not being monitored and finally, ways to design a resilient lubrication strategy.

How “good’ is good?

Many manufacturing plants have some form of a lubrication program in place. But many are not familiar with how to gauge this against best practices or industry standards. The following figure gives a brief description of the various stages of a lubrication program that can exist.

Although many plants may fall within the L2-L4 stages (and some in the L1 stage), there is still a lot of data missing on the documentation on lubrication failures and how these are being addressed (if they are being addressed at all). As such, there are no direct actionable items that link failures to strategies for preventing these in the future.

Industry standards attribute that around 33% of bearing failures are due to lubrication challenges. However, if our lubrication program is not capturing these lubrication related failures then the real root causes are not being addressed directly for these issues. As such, they are not being solved and we are adding to the overall unreliability of the plant. In these instances, our lubrication program is not adding value from a reliability perspective and is actually hiding some failures.

The real failures

Lubrication can account for a significant number of failures, but contamination also plays a crucial role. As per a study carried out by NRCC & STLE (National Research Council Canada & Society of Tribologists and Lubrication Engineers), particle induced failures are responsible for approximately 82% of failures. This means that our equipment is majorly failing because of contamination.

In our “Defined” maturity level 3 program, contamination is not even addressed. Hence, we could be missing the opportunity to remove this from our system and by extension reduce failures associated with contamination. With our level 3 program, we also do not have alarm limits for our oil tests to help us understand if we are approaching dangerous levels or not. This will cause us to miss opportunities where we could have prevented components from failure.

Download our Oil & Grease Storage Best Practices infographic for some tips to help outline the best practices for proper lubrication storage.

Even with a moderately tiered lubrication program, we are missing a lot of opportunities for improvement of the overall reliability of our plant. This can lead to the lubrication program being viewed as unsuccessful when in fact, it just didn’t capture the right data.

Apart from capturing data, we also need to act on that data. Even if we have an oil analysis program in place, if we are not trending the data or coordinating with our maintenance teams to troubleshoot potential issues, then the lubrication program is not helping to raise the reliability of the plant. The program is in fact hiding some of these inefficiencies.

When was your last audit?

Even though we may have built a lubrication program, have we audited it? Creating a lubrication program may be an easy feat for many but implementing it is another story in itself. This is where some programs fail because they exist on paper but not in practice. If our technicians are not collecting the right data or observing proper storage and handling techniques, then the lubrication program is just another piece of paper in the drawer collecting dust.

For those who have managed to get the lubrication program off the ground and have the right people integrated into it, an audit on the program is still a good idea. Sometimes when these programs are launched, the personnel responsible are excited to implement the new strategies but complacency can easily step in. This is when the quality of the results of the program can erode.

Your program may no longer be catching your failures in advance, and this can lead to a loss in production, emergency repairs and even unplanned shutdowns. Performing annual audits on your lubrication program to ensure that it is delivering actionable results is highly recommended.

Many failures and incompetencies can hide behind a “good lubrication program” but with proper auditing and identification of where your lubrication program actually measures up, you can take actions to make it a successful program.

Stay tuned for part 2 where we will be diving deeper into the failure modes that are not being monitored.

Thank you Sanya Mathura with Strategic Reliability Solutions Ltd for sharing this informative and educational series article with us!

Improper Lubrication Scenarios that can Lead to Pump Fires and How to Prevent Them