For your convenience, below the ATEX ratings of the intrinsically safe systems that we support along with their approx. US equivalents (refer to EXpert Guide Hazardous Locations). LUDECA can also calibrate, service, support and train you on all these intrinsically safe products:
ALIGNMENT
ALIGNEO® EX, OPTALIGN® EX, OPTALIGN® VEX/VPEX, OPTALIGN® PLUS EX, OPTALIGN® PLUS SERIES EX, OPTALIGN® SMART EX, ROTALIGN® SMART EX, ROTALIGN® EX, and ROTALIGN® PRO EX are certified for use in hazardous environments EEx ib IIC T4, approved for Zone 1 use. The EX RF module is certified for use in hazardous environments EEx ib IIC T4 Gb.
Approx. U.S. equivalent: NEC Article 500-4, Class 1, Division 1, Groups D, C, B, A and special safeguards T4.
EASY-LASER® D550 EXTREME™ fullfils the requirements according to Ex ib op is IIC T4 Gb 0°C ≤ Ta ≤ +40°C. ATEX code: II 2 G
EX certificate number: Presafe 14ATEX5726XIEC
Ex certificate number: IECEx PRE 14.0062X
EASY-LASER® XT550 fulfills ATEX requirements per below:
Ecom display unit Tab-Ex® 03 DZ1:
EX certificate number: EPS 22 ATEX 1055 X, IECEx EPS 22.0014X
ATEX/UKCA Ex classification: II 2G Ex db ia IIC T6 Gb IP64, -20°C ≤ Ta ≤ +55°C, II 2D Ex ia tb IIIC T80°C Db, -20°C ≤ Ta ≤ +55°C
IECEx classification: Ex db ia IIC T6 Gb IP64, -20°C ≤ Ta ≤ +55°C, Ex ia tb IIIC T80°C Db, -20°C ≤ Ta ≤ +55°C
Measuring units:
EX certificate number: Presafe 17 ATEX 10552X, IECEx PRE 17.0049X
EX classification: II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ +50°C II 2 D Ex ib op is IIIC T135°C Db, -10°C ≤ Ta ≤ +50°C
Approx. U.S. equivalent: NEC Article 500-4, Class 1, Division 1.
CONDITION MONITORING
VIBSCANNER® EX and VIBCODE® EX: II 2 G EEx e m ib IIC T4.
VIBXPERT® EX: II 2 G EEX ib IIC T4.
VIBREX® and VIBRONET®: EEx ia IIC T4
Industrial accelerometers: II 1 G EEx ia IIC T4 resp. II 2 G EEx ib IIC T4
ULTRASOUND
The SDT200 and SDT270 meet the requirements set by ATEX for use in the most dangerous and potentially explosive atmospheres in the world.
