Training

ALIGNMENT TRAINING SCHEDULE 2020

Roll up your sleeves and get ready for practical hands-on precision alignment courses, taught by experts, in a small class size to promote one-on-one interaction and personalized attention!

These Shaft Alignment training courses are mapped to the UPTIME® ELEMENTS™ by Reliabilityweb and to SMRP’s Equipment Reliability Body of Knowledge for continuing education units (CEU).

  • I enjoyed my time at your training facility. I appreciate everything that the staff and owners offer to the training. My instructor did a wonderful job in every aspect of the training. He was very knowledgeable and patient —with instructors like this, it is easy to stay on track.

    –L. Hensley, Instructor, WTI

SHAFT ALIGNMENT TRAINING

4-Day ROTALIGN® ULTRA/ROTALIGN® TOUCH

Miami, FL

January 28 – 31
March 24 – 27
May 19 – 22
July 21 – 24
September 29 – October 2
December 1 – 4

Course Description

3-DAY SHAFT ALIGNMENT

Kansas City, KS

January 28 – 30

Hosted by Kansas City Board of Public Utilities
Nearman Drinking Water Treatment Plant

Course Description

3-DAY SHAFT ALIGNMENT

BATON ROUGE, LA

March 3 – 5

Course Description

3-DAY ROTALIGN® ULTRA/ROTALIGN® TOUCH

BATON ROUGE, LA

July 14 – 16
October 20 – 22

Course Description

Rotalign Ultra Laser Shaft Alignment Onsite Group Training
  • I attended ROTALIGN® training and thought it would be a breeze and I would not learn much because I have over 20 years of industrial mechanical experience and have done hundreds of alignments from using dial indicators to reverse dials and also the ROTALIGN® Pro. I was wrong about that, the ROTALIGN® has many features that I was not aware of and I really enjoyed my class and all of the awesome people at LUDECA. I would recommend this class to anyone who does alignments.

    –P. Gant, Martin Drake Power Plant

4-DAY EASY-LASER® XT770

MIAMI, FL

January 28 – 31
March 24 – 27
May 19 – 22
July 21 – 24
September 29 – October 2
December 1 – 4

Course Description

3-DAY EASY-LASER® E710

MIAMI, FL

August 11 – 13

Course Description

Easy-Laser XT Shaft Alignment training class, students practicing soft foot on LT300 alignment simulators

3-DAY EASY-LASER® XT660/EASY-LASER® XT440

MIAMI, FL

February 11 – 13
June 16 – 18
September 22 – 24

Course Description

4-DAY ROTALIGN® PRO

MIAMI, FL

April 21 – 24
November 17 – 20

Course Description

  • I have been preaching the importance of precision alignment and how it will benefit increased equipment reliability for a long time. The mechanics realized how limited they were in their knowledge after Tim’s class was over. We knew the ROTALIGN® could serve us better but without proper training, we could not get there and Tim accomplished everything and more that I had expected. Thanks again!

    –T. Forsythe, CENG

4-DAY OPTALIGN® SMART

MIAMI, FL

April 21 – 24
November 17 – 20

Course Description

2-DAY EASY-LASER® E540/EASY-LASER® E420

MIAMI, FL

August 4 – 5

Course Description

  • I would like to thank LUDECA for your instruction, patience, hospitality and eagerness to help —which supported us in getting as much out of our 1-week training as possible. Our challenge now is to make sure we apply your alignment tool appropriately and within its design criteria.

    –J. Poole, Augusta Service Co./Potash Corp.
ALIGNEO, ROTALIGN, OPTALIGN, CENTRALIGN and LEVALIGN are registered trademarks of PRÜFTECHNIK Dieter Busch AG. EASY-LASER is a registered trademark of Easy-Laser AB.