BORALIGN® FOR ROTALIGN PRO
BORALIGN, the latest development for the measuring of bores and bearings in internal combustion engines, compressors, turbines, pumps and other machinery. BORALIGN is also designed for marine applications (stern tube bearing alignment) as well as for the alignment of work pieces to a boring head.
BORALIGN offers true bore center measurement, not just bore straightness. It measures whether multiple bores are in line with one another and with the rotating centerline of the shaft. Its measurement results to ISO 9000/MIMOSA standards can be documented through any office printer. The configuration can be tailored to meet the unique demands posed by a particular job and predefined values can be entered to compensate for thermal growth on shaft sag. Different brackets are available to cover a range of bore diameters.
The BORALIGN system brackets allow you to rotate a receiver (sensor) within a bore with diameters from 5" up to 30". The offset between bores can be measured to the nearest 0.0001". The particular bore type (i.e., simple, long, or complex) can be prescribed for each bore. This means that the angle of a bore with respect to any other bore can also be measured. At user's option, the tool can display graphically and in tabular form the offset of each measured bore with respect to a static reference laser line that does not have to be initially perfectly centered (big advantage), as well as displaying an optimized position for each bore relative to every other bore. A solution relative to any desired fixed bores is another choice. Also a differential solution can be chosen, whereby the offset of any bore relative to a line between its two nearest neighbors is seen. Once a train of bores has been measured with the static laser, the BORALIGN can also measure and display the alignment of the bore train to a rotating reference such as a boring tool.
Available as an add-on package to the ROTALIGN PRO
ALI 3.460vset for bore dia. 120mm-400mm
ALI 3.461vset for bore dia. 120mm-400mm (4-3/4"- 31")
ALI 3.462vset for bore dia. 390mm-810mm (15"- 31")
ALIGNMENT CENTER PC Software
Turbine bracket for "Tops Off" bore measurement